The CR Series is a compact 90-264 V AC Input to DC Flying Lead Output Battery Charger. Ideal for forklift, battery bank and car battery charger applications.
The PS1220 is designed as a 14.2V D.C/20A battery charger and battery charge state monitor. The charger first applies a fast charge to bring the battery up to nominal capacity and then applies a trickle charge to maintain that state.
The BMD Series is a compact 90-264 V AC Input & 13.8V DC Output Plus Battery Manager. AC Input, DC Output and Charger Status Monitoring functionality is supplemented with a 10-LED battery status indication.
The BM Series is a compact 90-264 V AC Input & 13.8V DC Output Plus Battery Manager. Built-in Active PFC and AC Input, DC Output and Charger Status Monitoring functionality housed in a stainless steel and powder coated casing.
The CMT712-BC is a compact 7 Amps 12 Volts DC multi-purpose battery charger that uses a 2-stage charging cycle, making it the ideal battery charger for telecomms, scooters, wheelchair and any vehicle requiring a 12 Volts charging.
The PFCMS1 is a 19" Control & Monitoring Rack for the DC4842 with removable ANSI/ETSI mounting flanges. Front Panel LEDs display the DC4842 Temperature, Output Voltage & Current.
The BC612 is designed as a charger station connected to either a PS1240 or PS2024 Battery Manager, expanding the Battery Manager’s charging capability to 6 batteries in parallel.
The PPS12 Power supply is a 240 VAC which generates up to 12 A at 13.8 VDC output voltage with a battery backup application. It uses a thermostatically controlled ball bearing fan to assist cooling.
The PPS15 is a 13.8 volt 15amp transformer isolated switch mode down converter designed to be used either as a stand alone supply or as a float style battery backed up supply when a lead acid battery is connected to its battery terminals.
The PPS20 is a 13.8 volt 20amp transformer isolated switch mode down converter designed to be used either as a stand alone supply or as a float style battery backed up supply when a lead acid battery is connected to its battery terminals.
The PS1240 is designed as a 14.2V D.C/40A battery charger and battery charge state monitor. The charger first applies a fast charge to bring the battery up to nominal capacity and then applies a trickle charge to maintain that state.
This product is designed as a vehicle battery charger and battery charge state monitor. While the vehicle is at its base or station, the charger is connected to the A.C Mains supply.
The PS2024 is designed as a 14.2 VDC/40A emergency vehicle battery charger and battery charge state monitor. The charger first applies a fast charge to bring the battery up to nominal capacity and then applies a trickle charge to maintain that state.
Upon reaching 10.5V (± 0.5V), thefloating contacts will close. These floating contacts can be used for both Normally Closed & Normally Open operation, making the LVC the ideal device to prevent excessive discharge of 12V battery sources.
C.M. Technology, pioneering switch mode power supplies design & development for over twenty-five years.